Case study · Die casting and automotive

Ensat inserts and machined surfaces: height inspection

Heights of Ensat inserts and their surrounding machined surfaces.

Image acquired during inspection of Ensat inserts and machined surfaces
2 images ↓

The challenge

A height difference can concern the insert or the nearby machined plane. The customer needed to assess both geometries, distinguishing an insert projecting too far or sitting too low from a surface outside its reference.

The inspection

Imago measures heights in the specified insert areas and on machined surfaces. Inspection compares these values with format requirements, checking the relationship between the insert and surrounding plane.

Inspection types

Project images

1 / 2
Image acquired during inspection of Ensat inserts and machined surfaces
01
Inspection image with overlays for Ensat inserts and machined surfaces
02Processed system view
Industrial robot extracting a die-cast part from the press inside a fenced cell, with a red-lit sensor and parts on a rack

Die casting and automotive

Explore the industry

More case studies

All cases
  1. Image from the project material for Machined surfaces: chips and porosity near holes

    Die casting and automotive

    Machined surfaces: chips and porosity near holes

  2. Image from the project material for Pulleys: surfaces, edges and recess geometry

    Die casting and automotive

    Pulleys: surfaces, edges and recess geometry

  3. Image from the project material for MCA component

    Die casting and automotive

    Machined holes: presence, diameter and surrounding defects

Image acquired during inspection of Ensat inserts and machined surfaces

Bring inspection into the line

We start from the part, the defect and the real production constraints.

Describe your problem